栏目导航

产品搜索

请输入产品关键字：

联系我们

地址：
电话：18823798418
传真：18823798418
邮箱：406595542@qq.com
联系人：廖小姐

您现在的位置：网站首页 > 产品展示

跃顺EL-380M手动式螺丝排列机

产品编号：20208221468
产品价格：¥ 电询
产品描述：跃顺EL-380M手动式螺丝排列机

【产品名称 NAME】

EL-380M 系列 EL-380M Series

【产品特性 Product Features】

1、适用螺丝范围广 Wide range of applicable screws

广泛适用于 M3.0-M8.0（螺丝长度 ≤30mm）多种类型和长度螺丝，

如标准螺丝、1:1 短螺丝、自攻螺丝、带垫片螺丝、铆钉、薄片及

小螺母等。

Widely used in M3.0-M8.0 (screw length ≤ 30mm) various types and

length screws, such as standard screws, 1:1 short screws, self-tapping

screws, with gasket screws, rivets, sheets and small nuts.

2、抗强光干扰 Resistance to strong light interference

螺丝感应不受强光的干扰，在强光下依然能正常工作，适应的环境

更广。

The screw induction is not disturbed by strong light, and it can still

work normally under strong light, and the adaptation environment is

wider.

3、运转流畅 Smooth operation

螺丝在滚筒内运转，凡是未按正常方向进入轨道的螺丝，都会掉到

滚筒内，进入下个循坏，无卡料现象。

The screw runs in the drum. Any screw that does not enter the track

in the normal direction will fall into the drum and enter the next

cycle, without jamming.

4、显示计数功能 Display counting function

准确计数、循环、带液晶显示面板。

Accurate counting, cycling, with LCD panel.

5、供料效率可调节 Feeding efficiency can be adjusted

上料与振动独立控制，可自由设定理想的上料速度和振动大小；四

分度圆盘停顿独立控制，可以根据不同螺丝和用户需求设定时间长

短，适合多种作业。

The feeding and vibration are independently controlled, and the

ideal feeding speed and vibration size can be set freely. The four

division disc pauses independently and can be set according to

different screws and user requirements, which is suitable for various

operations.

6、有故障报警功能 Fault alarm function

当非正常情况发生时，如缺料，螺丝机会自动启动报警功能。

When an abnormal situation occurs, such as a shortage of material,

the screw machine automatically activates the alarm function.

7、大容量 Large capacity

体积适中，料仓空间大，方便实用。

The volume is moderate, the silo space is large, convenient and

practical.

8、过载保护 Overload protection

全面升级控制主板，对上料电机及分度盘步进电机，出

现卡料时，系统自动控制电机进行反转一定时间，避免

过载烧毁电机或线路板。

Fully upgrade the control board, for the feeding motor and

the indexing stepper motor, when the card is in stock, the

system automatically controls the motor to reverse for a

certain period of time to avoid overloading the motor or

circuit board.

9、防漏提醒 Anti-leak reminder

可以更好控制产品上锁的螺丝数量，防止出现螺丝漏打

现象，供料更准确。

The number of screws that can be locked by the product

can be better controlled to prevent the phenomenon of

screw leakage and the feeding is more accurate.

上一个：跃顺El-380D点数式螺丝排列机下一个：跃顺NSRI螺丝排列机